Import VM Templates

This is a part of the post of how to install R12.1.3 from a VM template.

Before you can create a VM from a template in OVM 3.1.1 it must be imported into OVM using FTP.

Well in reality you import the templates into the Repository.

Importing VM

Select your repository:

image

Click on the import icon:

image

Import these two:

ftp://anonymous:x@192.168.1.6/db.tgz

ftp://anonymous:x@192.168.1.6/apps.tgz

When job is started progress is hard to see but if you login to the OVS you can see it in:

/OVS/Respositories/{hex number 1}/Templates/{hex number 2}/tmp/*.tgz

In OVM the job shows progress while doing this as well.

Which is then unpacked in same directory to:

OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM

OVM_OL5U6_X86_64_EBIZ12.1.3_DB_VIS_PVM

This means you need space for both the tgz file and the resulting unpacked files in the repository:

· DB: tgz = 31Gb and uncompressed files = 250Gb

· APPS: = 9 Gb and uncompressed files = 50Gb

When done the files are moved to:

/OVS/Respositories/{hex number 1}/Templates/{hex number 2}/vm.cfg

And

/OVS/Respositories/{hex number 1}/VirtualDisks/{hex number 3}/*.img

Also this process takes forever as the tgz and the uncompress files are on the same disk system causing I/O contention.

After import of DB you should have:

image

And i the overview:

image

And these Virtual Disks:

image

This entry was written by Kent Willumsen , posted on Friday August 31 2012at 11:08 am , filed under R12 Installation, Technical Knowledge, Virtual Manager and tagged , , . Bookmark the permalink . Post a comment below or leave a trackback: Trackback URL.

Comments are closed.